0

Your Cart is Empty

How to Find the Correct Parts for Your CD Model Generator Continued

There are two possibilities for the fuel shut off solenoid. There's a two wire and a three wire solenoid.  Click Here to view the two wire solenoid (05SOLF05S-NEW).  Click Here to view the three wire solenoid (05SOLF05S). If you have a CD7000, it will be the three wire solenoid. If you have a two wire solenoid, it could be the two wire or the three wire solenoid.

KUBOTA 05 OIL FILTER
The Kubota 01FO05S oil filter is the only option for the CD model generators. Although there are many aftermarket filters available as a replacement. Power Tech recommends using the OEM Kubota filters to ensure the longevity of the generator's engine.  

KUBOTA D04 FUEL FILTER
The Kubota 04FF081 fuel filter is the only option for the CD7000 and some CD8000 generators. Although there are many aftermarket filters available as a replacement. Power Tech recommends using the OEM Kubota filters to ensure the longevity of the generator's engine.  

KUBOTA D06 FUEL FILTER
The Kubota 08FF17 fuel filter is an option for generators built after 2012. This is not an option for the CD7000 Generator. Although there are many aftermarket filters available as a replacement. Power Tech recommends using the OEM Kubota filters to ensure the longevity of the generator's engine.  

Do you have a CD8000 built after 2012 and don't know what fuel filter to purchase?

See the Difference

 AIR FILTER FOR METAL HOUSING
The 04FA221 air filter element for a metal housing. This filter has directional plastic fins on the filter and it measures at 7 3/8" in length and 3 1/4" in diameter.  Need the air filter element and the housing? Click on the housing part number: 04AC42503

AIR FILTER FOR PLASTIC HOUSING
The 04FA2SE1 air filter element for a plastic housing. This filter element measures at 7 1/4" in length and 3 7/16" in diameter.Need the air filter element and the housing? Click on the housing part number: 04AC2S

DISPOSABLE AIR FILTER
The 04FA45001 air filter includes the element and the housing. When replacing this filter, it is required to dispose of the entire filter system.

Note: The foam ring that was used with this filter is no longer required and is a non-stock item for Power Tech.

There are two options for glow plugs on the CD Model generators. There is a 10mm and 12mm size difference. The best way to determine what size you have on your diesel generator is to place a socket on the head of the glow plug to find the correct size.

The CD7000 and CD8000 generators both use the same mounting assembly. The CD models require one frontmount located underneath the engine. The generator also requires a front mount isolator and two rear engine mounts to complete the mounting system.

FRONT ENGINE MOUNT
One front engine mount is required for the CD7000 and CD8000 generators. The Power Tech part number is 09MNTCD7720

REAR ENGINE MOUNT
Two rear engine mounts are required for the CD7000 and CD8000 generators. The Power Tech part number is 09MNTCD7710

FRONT ENGINE ISOLATOR
One front engine mount isolator is required for the CD7000 and CD8000 generators. This isolator supports the front engine mount in the mounting system. The Power Tech part number is 09MNTIS38HM

Exhaust System

The exhaust system on a CD Model Generator is one of the most custom aspects of the entire system. Power Tech mobile generators are shipped out with exhaust parts requested and purchased by the end user. Every application requires a different exhaust setup depending on the needs and restrictions of the application. The list below are parts that are compatible with the CD model and might be on your generator. Please check your generator's exhaust layout before ordering parts to ensure that you have everything you'll need to repair or replace the proper parts.  

SHORT MUFFLER - 04MUF05N
Short muffler with a welded tailpipe. The overall length is 37 inches with 1 1/4" pipe thread size. The Power Tech part number is 04MUF05N

LONG MUFFLER - 04MUFNM2T4
Long muffler with a welded tailpipe. The overall length is 6ft with 1 1/4" pipe thread size. The Power Tech part number is 04MUFNM2T4

There are two options for the CD model generator. Check to see where your generator's exhaust is coming out of the unit. There's a down out exhaust flange which requires the exhaust to come out of the bottom (base pan) of the generator. The second options is the side out exhaust flange. This flange requires the exhaust to exit out of the side sheet metal of the generator.

Need Help?

Leave Us A Message

We hope this page was informative when it comes to CD7000 and CD8000 replacement parts.  If you still have any questions, please feel free to contact us before placing your order.