Power Tech Mobile Generator Drive Belt for the 3 kW Generator
Drive belt for the 3 kW Power Tech generators. This drive belt for the 3 kW Sprinter Van Generator is an elastic belt featuring six longitudinal ribs. The belt tension can be stabilized after just a few minutes of use. Tension will not change throughout the lifetime of the belt. The 3 kW drive belt's elastic properties guarantee automatic and constant tension.
More Information about the Mobile 3 kW Generator - The PT-3SV2
This RV Mobile Power Generator is designed to hang beneath the chassis of the Mercedes Sprinter Van. This flexible unit will deliver 3000 watts prime power in any application, from trucks to motor coaches. This single cylinder workhorse delivers maximum performance while using less than a quart of fuel per hour at a full load.
Tech Tip: When installing the new drive belt on your 3 kW Generator, do not pry on the belt with a screwdriver. It creates small cuts in the belt and will result in a damaged belt that will need to be replaced again. Instead, remove all the bolts except one from your pulley. Place the belt on the pulley and press the pulley back up to the original position. Reinstall the bolts and the installation is complete. Please note, these belts stretch and will be tight during the installation.
The Power Tech Mobile Generator Part Number: 03BELT3KW