PowerTechCS Wireless Switch Sensor

Monitor any normally open switch or relay.

  • Connect both leads to the terminals on the switch/relay.
  • Plug the switch sensor tail into the wireless module and tighten the two hex screws.
  • Install the wireless sensor battery.
  • Pair the wireless sensor module with the PowerTechCS App.
  • Secure the Wireless Switch Sensor using the supplied mounting bracket.

NOTE: Notifications will be sent to the PowerTechCS App if the switch is closed. Do not connect the sensor leads to line power. An appropriate relay must be used to monitor line voltage items.


PowerTech Mobile Generators