This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

03BELT3KW

Drive Belt for the 3 kW Generator

Drive belt for the 3 kW Power Tech generators. This drive belt for the 3 kW Sprinter Van Generator is an elastic belt featuring six longitudinal ribs. The belt tension can be stabilized after just a few minutes of use, and tension will not change throughout the lifetime of the belt. The 3 kW drive belt's elastic properties guarantee automatic and constant tension.

Tech Tip:When installing the new drive belt on your 3 kW Generator, do not pry on the belt with a screwdriver. It creates small cuts in the belt and will result in a damaged belt that will need to be replaced again. Instead, remove all the bolts except one from your pulley. Place the belt on the pulley and press the pulley back up to the original position. Reinstall the bolts and the installation is complete.

Search

PowerTech Mobile Generators